9 Beste Bitcoin Wallet Hardware & Kryptowährung Apps (2020)

Cryptocurrency Platform

A decentralized crypto platform where users automatically receive airdrops from our partners simply for holding our coins // $CSTL // [email protected]
[link]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Reddcoin (RDD) 02/20 Progress Report - Core Wallet v3.1 Evolution & PoSV v2 - Commits & More Commits to v3.1! (Bitcoin Core 0.10, MacOS Catalina, QT Enhanced Speed and Security and more!)

Reddcoin (RDD) Core Dev Team Informal Progress Report, Feb 2020 - As any blockchain or software expert will confirm, the hardest part of making successful progress in blockchain and crypto is invisible to most users. As developers, the Reddcoin Core team relies on internal experts like John Nash, contributors offering their own code improvements to our repos (which we would love to see more of!) and especially upstream commits from experts working on open source projects like Bitcoin itself. We'd like tothank each and everyone who's hard work has contributed to this progress.
As part of Reddcoin's evolution, and in order to include required security fixes, speed improvements that are long overdue, the team has up to this point incorporated the following code commits since our last v3.0.1 public release. In attempting to solve the relatively minor font display issue with MacOS Catalina, we uncovered a complicated interweaving of updates between Reddcoin Core, QT software, MacOS SDK, Bitcoin Core and related libraries and dependencies that mandated we take a holistic approach to both solve the Catalina display problem, but in doing so, prepare a more streamlined overall build and test system, allowing the team to roll out more frequent and more secure updates in the future. And also to include some badly needed fixes in the current version of Core, which we have tentatively labeled Reddcoin Core Wallet v3.1.
Note: As indicated below, v3.1 is NOT YET AVAILABLE FOR DOWNLOAD BY PUBLIC. We wil advise when it is.
The new v3.1 version should be ready for internal QA and build testing by the end of this week, with luck, and will be turned over to the public shortly thereafter once testing has proven no unexpected issues have been introduced. We know the delay has been a bit extended for our ReddHead MacOS Catalina stakers, and we hope to have them all aboard soon. We have moved with all possible speed while attempting to incorproate all the required work, testing, and ensuring security and safety for our ReddHeads.
Which leads us to: PoSV v2 activation and the supermajority on Mainnet at the time of this writing has reached 5625/9000 blocks or 62.5%. We have progressed quite well and without any reported user issues since release, but we need all of the community to participate! This activation, much like the funding mechanisms currently being debated by BCH and others, and employed by DASH, will mean not only a catalyst for Reddcoin but ensure it's future by providing funding for the dev team. As a personal plea from the team, please help us support the PoSV v2 activation by staking your RDD, no matter how large or small your amount of stake.
Every block and every RDD counts, and if you don't know how, we'll teach you! Live chat is fun as well as providing tech support you can trust from devs and community ReddHead members. Join us today in staking and online and collect some RDD "rain" from users and devs alike!
If you're holding Reddcoin and not staking, or you haven't upgraded your v2.x wallet to v3.0.1 (current release), we need you to help achieve consensus and activate PoSV v2! For details, see the pinned message here or our website or medium channel. Upgrade is simple and takes moments; if you're nervous or unsure, we're here to help live in Telegram or Discord, as well as other chat programs. See our website for links.
Look for more updates shortly as our long-anticipated Reddcoin Payment Gateway and Merchant Services API come online with point-of-sale support, as we announce the cross-crypto-project Aussie firefighter fundraiser program, as well as a comprehensive update to our development roadmap and more.
Work has restarted on ReddID and multiple initiatives are underway to begin educating and sharing information about ReddID, what it is, and how to use it, as we approach a releasable ReddID product. We enthusiastically encourage anyone interested in working to bring these efforts to life, whether writers, UX/UI experts, big data analysts, graphic artists, coders, front-end, back-end, AI, DevOps, the Reddcoin Core dev team is growing, and there's more opportunity and work than ever!
Bring your talents to a community and dev team that truly appreciates it, and share the Reddcoin Love!
And now, lots of commits. As v3.1 is not yet quite ready for public release, these commits have not been pushed publicly, but in the interests of sharing progress transparently, and including our ReddHead community in the process, see below for mind-numbing technical detail of work accomplished.
e5c143404 - - 2014-08-07 - Ross Nicoll - Changed LevelDB cursors to use scoped pointers to ensure destruction when going out of scope. *99a7dba2e - - 2014-08-15 - Cory Fields - tests: fix test-runner for osx. Closes ##4708 *8c667f1be - - 2014-08-15 - Cory Fields - build: add funcs.mk to the list of meta-depends *bcc1b2b2f - - 2014-08-15 - Cory Fields - depends: fix shasum on osx < 10.9 *54dac77d1 - - 2014-08-18 - Cory Fields - build: add option for reducing exports (v2) *6fb9611c0 - - 2014-08-16 - randy-waterhouse - build : fix CPPFLAGS for libbitcoin_cli *9958cc923 - - 2014-08-16 - randy-waterhouse - build: Add --with-utils (bitcoin-cli and bitcoin-tx, default=yes). Help string consistency tweaks. Target sanity check fix. *342aa98ea - - 2014-08-07 - Cory Fields - build: fix automake warnings about the use of INCLUDES *46db8ad51 - - 2020-02-18 - John Nash - build: add build.h to the correct target *a24de1e4c - - 2014-11-26 - Pavel Janík - Use complete path to include bitcoin-config.h. *fd8f506e5 - - 2014-08-04 - Wladimir J. van der Laan - qt: Demote ReportInvalidCertificate message to qDebug *f12aaf3b1 - - 2020-02-17 - John Nash - build: QT5 compiled with fPIC require fPIC to be enabled, fPIE is not enough *7a991b37e - - 2014-08-12 - Wladimir J. van der Laan - build: check for sys/prctl.h in the proper way *2cfa63a48 - - 2014-08-11 - Wladimir J. van der Laan - build: Add mention of --disable-wallet to bdb48 error messages *9aa580f04 - - 2014-07-23 - Cory Fields - depends: add shared dependency builder *8853d4645 - - 2014-08-08 - Philip Kaufmann - [Qt] move SubstituteFonts() above ToolTipToRichTextFilter *0c98e21db - - 2014-08-02 - Ross Nicoll - URLs containing a / after the address no longer cause parsing errors. *7baa77731 - - 2014-08-07 - ntrgn - Fixes ignored qt 4.8 codecs path on windows when configuring with --with-qt-libdir *2a3df4617 - - 2014-08-06 - Cory Fields - qt: fix unicode character display on osx when building with 10.7 sdk *71a36303d - - 2014-08-04 - Cory Fields - build: fix race in 'make deploy' for windows *077295498 - - 2014-08-04 - Cory Fields - build: Fix 'make deploy' when binaries haven't been built yet *ffdcc4d7d - - 2014-08-04 - Cory Fields - build: hook up qt translations for static osx packaging *25a7e9c90 - - 2014-08-04 - Cory Fields - build: add --with-qt-translationdir to configure for use with static qt *11cfcef37 - - 2014-08-04 - Cory Fields - build: teach macdeploy the -translations-dir argument, for use with static qt *4c4ae35b1 - - 2014-07-23 - Cory Fields - build: Find the proper xcb/pcre dependencies *942e77dd2 - - 2014-08-06 - Cory Fields - build: silence mingw fpic warning spew *e73e2b834 - - 2014-06-27 - Huang Le - Use async name resolving to improve net thread responsiveness *c88e76e8e - - 2014-07-23 - Cory Fields - build: don't let libtool insert rpath into binaries *18e14e11c - - 2014-08-05 - ntrgn - build: Fix windows configure when using --with-qt-libdir *bb92d65c4 - - 2014-07-31 - Cory Fields - test: don't let the port number exceed the legal range *62b95290a - - 2014-06-18 - Cory Fields - test: redirect comparison tool output to stdout *cefe447e9 - - 2014-07-22 - Cory Fields - gitian: remove unneeded option after last commit *9347402ca - - 2014-07-21 - Cory Fields - build: fix broken boost chrono check on some platforms *c9ed039cf - - 2014-06-03 - Cory Fields - build: fix whitespace in pkg-config variable *3bcc5ad37 - - 2014-06-03 - Cory Fields - build: allow linux and osx to build against static qt5 *01a44ba90 - - 2014-07-17 - Cory Fields - build: silence false errors during make clean *d1fbf7ba2 - - 2014-07-08 - Cory Fields - build: fix win32 static linking after libtool merge *005ae2fa4 - - 2014-07-08 - Cory Fields - build: re-add AM_LDFLAGS where it's overridden *37043076d - - 2014-07-02 - Wladimir J. van der Laan - Fix the Qt5 build after d95ba75 *f3b4bbf40 - - 2014-07-01 - Wladimir J. van der Laan - qt: Change serious messages from qDebug to qWarning *f4706f753 - - 2014-07-01 - Wladimir J. van der Laan - qt: Log messages with type>QtDebugMsg as non-debug *98e85fa1f - - 2014-06-06 - Pieter Wuille - libsecp256k1 integration *5f1f2e226 - - 2020-02-17 - John Nash - Merge branch 'switch_verification_code' into Build *1f30416c9 - - 2014-02-07 - Pieter Wuille - Also switch the (unused) verification code to low-s instead of even-s. *1c093d55e - - 2014-06-06 - Cory Fields - secp256k1: Add build-side changes for libsecp256k1 *7f3114484 - - 2014-06-06 - Cory Fields - secp256k1: add libtool as a dependency *2531f9299 - - 2020-02-17 - John Nash - Move network-time related functions to timedata.cpp/h *d003e4c57 - - 2020-02-16 - John Nash - build: fix build weirdness after 54372482. *7035f5034 - - 2020-02-16 - John Nash - Add ::OUTPUT_SIZE *2a864c4d8 - - 2014-06-09 - Cory Fields - crypto: create a separate lib for crypto functions *03a4e4c70 - - 2014-06-09 - Cory Fields - crypto: explicitly check for byte read/write functions *a78462a2a - - 2014-06-09 - Cory Fields - build: move bitcoin-config.h to its own directory *a885721c4 - - 2014-05-31 - Pieter Wuille - Extend and move all crypto tests to crypto_tests.cpp *5f308f528 - - 2014-05-03 - Pieter Wuille - Move {Read,Write}{LE,BE}{32,64} to common.h and use builtins if possible *0161cc426 - - 2014-05-01 - Pieter Wuille - Add built-in RIPEMD-160 implementation *deefc27c0 - - 2014-04-28 - Pieter Wuille - Move crypto implementations to src/crypto/ *d6a12182b - - 2014-04-28 - Pieter Wuille - Add built-in SHA-1 implementation. *c3c4f9f2e - - 2014-04-27 - Pieter Wuille - Switch miner.cpp to use sha2 instead of OpenSSL. *b6ed6def9 - - 2014-04-28 - Pieter Wuille - Remove getwork() RPC call *0a09c1c60 - - 2014-04-26 - Pieter Wuille - Switch script.cpp and hash.cpp to use sha2.cpp instead of OpenSSL. *8ed091692 - - 2014-04-20 - Pieter Wuille - Add a built-in SHA256/SHA512 implementation. *0c4c99b3f - - 2014-06-21 - Philip Kaufmann - small cleanup in src/compat .h and .cpp *ab1369745 - - 2014-06-13 - Cory Fields - sanity: hook up sanity checks *f598c67e0 - - 2014-06-13 - Cory Fields - sanity: add libc/stdlib sanity checks *b241b3e13 - - 2014-06-13 - Cory Fields - sanity: autoconf check for sys/select.h *cad980a4f - - 2019-07-03 - John Nash - build: Add a top-level forwarding target for src/ objects *f4533ee1c - - 2019-07-03 - John Nash - build: qt: split locale resources. Fixes non-deterministic distcheck *4a0e46e76 - - 2019-06-29 - John Nash - build: fix version dependency *2f61699d9 - - 2019-06-29 - John Nash - build: quit abusing AMCPPFLAGS *99b60ba49 - - 2019-06-29 - John Nash - build: avoid the use of top and abs_ dir paths *c8f673d5d - - 2019-06-29 - John Nash - build: Tidy up file generation output *5318bce57 - - 2019-06-29 - John Nash - build: nuke Makefile.include from orbit *672a25349 - - 2019-06-29 - John Nash - build: add stub makefiles for easier subdir builds *562b7c5a6 - - 2020-02-08 - John Nash - build: delete old Makefile.am's *066120079 - - 2020-02-08 - John Nash - build: Switch to non-recursive make
Whew! No wonder it's taken the dev team a while! :)
TL;DR: Trying to fix MacOS Catalina font display led to requiring all kinds of work to migrate and evolve the Reddcoin Core software with Apple, Bitcoin and QT components. Lots of work done, v3.1 public release soon. Also other exciting things and ReddID back under active dev effort.
submitted by TechAdept to reddCoin [link] [comments]

1 Millionth Bitcoin Wallet Created on Blockchain.info

1 Millionth Bitcoin Wallet Created on Blockchain.info submitted by xrandr to Bitcoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Asking questions

So I've decided to join the illustrious pursuit of Bitcoin mining. I've done a bit of research on the matter, and read over a few of the posts here. And I still have a lot of research to do yet. My first problem is that there's still a lot that I'm not sure about and I'm still new enough that I don't quite know the right questions to ask, or if the questions I'm trying to ask are even applicable. So, I wanted to outline my situation and some of my thoughts here and see if this great community could help direct my research.
To start off, I purchased my ASIC hardware today, and I'm awaiting delivery. I managed to get a total of 13.2GH/s for less than $300, which seemed like a good buy. It's more MH/s per $ than the $350 USB device that butterfly labs was offering. I know that's pretty weak, but it's where I've decided to start. It's good enough for getting my feet wet.
My first real question is regarding the network bandwidth requirements of an active mining setup. All of the online guides I have read have said absolutely nothing to this issue. Common sense would tell me that this is either a negligible concern or in some other way, so bluntly obvious that it doesn't bear mentioning. So at the risk of sounding dense, can anybody describe their situation in this area? I've got a 12Mb/s DSL connection, will that be a bottleneck issue or will it suffice?
As I've come to understand, my next steps are to setup a wallet for the currency, join a user pool and setup a mining client. And it's these steps where my questions begin.
The most popular choice among the webz for walltes was easily Bitcoin Armory, but the 6GB RAM requirement is a nonstarter for my current hardware setup. I understand that they are working to reduce that requirement and that, also, there are hardware wallet modules hitting the market soon. Until one of the two options becomes available, I'm looking at utilizing a third party, web based wallet. Any suggestions in that regard would be appreciated. But my first concern with a wallet is that I am very interested in mining cryptocurrencies other than Bitcoin. I haven't been able to get an answer as to whether or not I will need an individual wallet for each unique currency I mine or if wallets generally support more than one currency type.
Reading through a number of the beginner's guides found through google gave me the impression that installing a mining client and joining a mining pool were separate issues. But a thread I read here seemed to indicate that particular clients were tied to specific mining pools. Preferably, I'd prefer a client that would allow me to select a mining pool, as well as supporting mining for Bitcoin as well as multiple other cryptocurrencies. Is that a realistic expectation?
If the tone of any of my questions suggest any broad misconceptions, I would appreciate a heads up. If anybody can link to some helpful literature on the subject, that would also be appreciated.
Thanks for reading, and cheers for any help.
submitted by playedspades to BitcoinBeginners [link] [comments]

Open Bitcoin Privacy Protect Privacy Questionnaire, Mid-Year 2015 report | wei at openbitcoinprivacyproject.org | Aug 07 2015

wei at openbitcoinprivacyproject.org on Aug 07 2015:
Hi,
Hope it is OK to post this on the list, was not sure where else to post
for answers from Bitcoin-Qt client developers.
As part of the Open Bitcoin Privacy Project’s ongoing wallet privacy
measurement efforts, we’ve selected the Bitcoin-Qt client v0.11.0 for
inclusion into our 2015 mid year survey.
While our volunteers will be performing a series of functional tests by
interacting with your application directly, several of the features we’d
like to examine are not easily discernible by non-developers, and for
this reason we’re asking for your help.
If you can answer the following questions about your wallet’s behavior
it will assist us with the process of accurately rating your wallet’s
privacy features.
Transaction Formatting 
  1. Does your application take any steps to create ambiguity between
transactions which unavoidably spend from multiple addresses at the same
time and intentional mixing transactions?
  1. What algorithms does your application use for ordering inputs and
outputs in a transaction? In particular, how do you handle the change
output and do you take into account common practices of other wallet
applications when determining ordering?
  1. Does your application minimize the harmful effects of address reuse
by spending every spendable input (“sweeping”) from an address when a
transaction is created?
  1. Does your application fully implement BIP 62?
Mixing
  1. If your application supports mixing:
a. What is the average number of participants a user can expect to
interact with on a typical join transaction?
b. Does your application attempt to construct join transactions in a way
that avoids distinguishing them from non-join transactions?
c. Does your application perform any kind of reversibility analysis on
join transactions prior to presenting them to the user for confirmation?
d. Is the mixing technique employed secure against correlation attacks
by the facilitator, such as a CoinJoin server or off-chain mixing
service?
e. Is the mixing technique employed secure against theft of funds by the
facilitator or its participants?
Donations
  1. If your application has a fee or donation to the developers feature:
a. What steps do you take to make the donations indistinguishable from
regular spend in terms of output sizes and destination addresses?
Balance Queries and Tx Broadcasting
  1. Please describe how your application obtains balance information in
terms of how queries from the user’s device can reveal a connection
between the addresses in their wallet.
a. Does the application keep a complete copy of the blockchain locally
(full node)?
b. Does the user’s device provide a filter which matches some fraction
of the blockchain while providing a false positive rate (bloom or prefix
filters)?
i. If so, approximately what fraction of the blockchain does the filter
match in a default configuration (0% - 100%)?
c. Does the user’s device query all of their addresses at the same time?
d. Does the user’s device query addresses individually in a manner that
does not allow the query responder to correlate queries for different
addresses?
e. Can users opt to obtain their balance information via Tor (or
equivalent means)?
  1. Does the applications route outgoing transactions independently from
the manner in which it obtains balance information? Can users opt to
have their transactions submitted to the Bitcoin network via Tor (or an
equivalent means) independently of how they obtain their balance
information?
  1. If your application supports multiple identities/wallets, does each
one connect to the network as if it were completely independent from the
other?
a. Does the application ever request balance information for addresses
belonging to multiple identities in the same network query?
b. Are outgoing transactions from multiple identities routed
independently of each other to the Bitcoin network?
c. When an identity/wallet is deleted, does the deletion process
eliminate all evidence from the user's device that the wallet was
previously installed?
Network Privacy 
  1. When a user performs a backup operation for their wallet, does this
generate any automatic network activity, such as a web query or email?
  1. Does your application perform any lookup external to the user’s
device related to identifying transaction senders or recipients?
  1. Does you application connect to known endpoints which would be
visible to an ISP, such as your domain?
  1. If your application connects directly to nodes in the Bitcoin P2P
network, does it either use an unremarkable user agent string (Bitcoin
Core. BitcoinJ, etc), or randomize its user agent on each connection?
Physical Access 
  1. Does the application uninstall process for your application
eliminate all evidence from the user's device that the application was
previously installed? Does it also eliminate wallet data?
  1. Does your application use techniques such as steganography to store
persistent wallet metadata in a form not identifiable as belong to a
Bitcoin wallet application?
  1. Please describe the degree to which users can use passwords/PINs to
protect their data:
a. Can the user set a password/PIN to protect their private keys?
b. Can the user set a password/PIN to protect their public keys and
balance information?
c. Can the user set a password/PIN to encrypt other wallet metadata,
such as address books and transaction notes?
d. Does the application use a single password/PIN to cover all protected
data, or does it allow the use of multiple passwords/PINs?
Custodianship
  1. Do you as a wallet provider ever have access to unencrypted copies
of the user’s private keys, public keys, or any other wallet metadata
which may be used to associate a user with their transactions or
balances?
Telemetry Data 
  1. If your application reports telemetry data, such as usage
information or automatic crash reporting, does the user have the
opportunity to review and approve all information transmitted before it
is sent?
Source Code and Building 
  1. Can a user of your application compile the application themselves in
a manner that produces a binary version identical to the version you
distribute (deterministic build system)?
Thank you for assisting us with this effort to measure privacy progress
in the Bitcoin wallet space. If at all possible, please return this
survey before 2015/08/13 to ensure the score for your application will
be as accurate as possible.
Sincerely,
Wei
Open Bitcoin Privacy Project Contributor
original: http://lists.linuxfoundation.org/pipermail/bitcoin-dev/2015-August/010006.html
submitted by bitcoin-devlist-bot to bitcoin_devlist [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Games4coins.com .. a new service to buy Steam keys with BTX

Games4coins.com .. a new service to buy Steam keys with BTX
Artwork by Desing Team - Bitcore BTX ® 2018
Steam is a digital distribution platform developed by Valve Corporation offering digital rights management1 (DRM), multiplayer gaming and social networking services. Steam provides the user with installation and automatic updating of games on multiple computers, and community features such as friend lists and groups, cloud saving, and in-game voice and chat functionality.
If you purchase a game that uses Steam from another website as a digital download, you'll be given a product key that you use to activate the game on Steam. A Steam key is a unique code that you will use to access the full game2.
Bitcore BTX originally a hybrid fork of Bitcoin, features a proof-of work consensus mechanism and implements all of the BIPs (Bitcoin Improvement Proposals) of the Bitcoin protocol3.
Bitcore: The most clever Bitcoin fork” -- Jimmy Song, Bitcoin Core Developer
More exchanges are listing Bitcore (BTX) and businesses are adopting it. One of the latest cases of adoption of BTX is in purchasing Steam Games Key from Games4Coins.
Games4Coins is a platform that you can purchase Steam product keys. Buying a game on Games4Coins is really simple. Once you have selected a game, you can quickly and securely pay. Why we say quickly and securely? Because a powerful cryptocurrency, Bitcore (BTX) is accepted as a payment coin at this platform (Figure 1). Moreover, as a crypto, they accept only Bitcore.
Figure 1. Bitcore accepted in Games4Coins
After the transaction is complete, you gain full access to your purchased game key which is 15 letter+number code that would look something like this: 8GMR2-Q20YJ-9PDKL. Once you get that, you go into your steam app on your computer and go to Games > Activate a product on steam. Then it will have a space for you to put your code.
Bitcore is one Cryptocurrency with a big Future”. Games4Coins Team
There are totally forty seven steam games and you can pay via Bitcore for all games. Moreover the prices are very cheap, between 0.44303596 BTX and 5.41588852 BTX (Figure 2).
Figure 2. Some samples for the steam games and their price
Consequently, Bitcore is one of the best cryptos in the market. It is also one of the fastest cryptos in the market when compared to Bitcoin, Litecoin and many other top 10 cryptos. Given that transaction speeds are a factor in the applicability of crypto in real-world business usage, it then follows that Bitcore’s long-term prospects are quite good, as blockchain technology continues to gain a foothold in business. This kind of integrations could open the doors for other major businesses to adopt BTX as a payment method, further adding to the intrinsic value of this crypto. The future of Bitcore (BTX) looks great.
Author: Chris DEVTeam Bitcore | [[email protected]](mailto:[email protected])
Download PDF

GAMES4COINS HERE

References
1 https://en.wikipedia.org/wiki/Digital_rights_management
2 https://support.steampowered.com/kb_article.php?ref=5414-tfbn-1352
3 https://bitcore.cc/white-pape

https://preview.redd.it/0matv78hrml11.png?width=1440&format=png&auto=webp&s=e8596b7325dd200f5d5a098e83d9a918a7dc7848
Web: Official | News | Coin Specs | Roadmap | White Paper | Ecosystem | Network Update | Community | FAQ | Blog | TeamWallets: Windows | Win Wallet & Blockchain | Linux | Mac | iOS | Android | Eletrum | Zeltrez | Jaxx LibertyExchanges: Bit Z | Cryptopia | hitBTC | VE Bitcoin | Exrates | Crypto Bridge | QBTC | Coinexchange | Octaex | Bitexlive | Bitibu | Trade Satoshi | PayCML | ExcoincialServices: Livingroom of Satoshi | Kamoney | Cryptonaut | EasyRabBit.net | LuckyGames.io | InstaSwap Block Explorers: InsightAPI | Crypto ID | LiivenetMining Pools: Bitcorepool | Yiimp | Suprnova | Chainworks | Umine | Ant Mine Pool | Coin Miners | BSOD | BTXpool | Minersport | Omegapool | PoolGPUMarket Info: CoinMarketCap | World Coin Index | Cryptocompare Source: Github | Kryptowerk | DgCarlosLeon

submitted by dgcarlosleon to bitcore_btx [link] [comments]

Beginners guide to Syscoin (SYS) and why you should be investing in this cryptocurrency in 2018

What is Syscoin?

Some have described Syscoin (SYS) as the Shopify, Amazon and Ebay of the blockchain world. Syscoin is a revolutionary cryptocurrency that offers near zero cost financial transactions, incredible speed and provides businesses the infrastructure to trade goods, assets, digital certificates and data securely. Syscoin isn’t just about money and trading, it has the ability to attract various business types thanks to its native set of features geared towards business on the blockchain. From eBay traders and High Street shops to Medical applications, Insurance and Gaming, Syscoin’s decentralized network benefits everyone!
Syscoin is developed by Blockchain Foundry (BF). BF provides blockchain technology based services, projects and products for a wide variety of use cases with the stated aim of disrupting markets by leveraging the potential of blockchain technology. Syscoin is mainly known to be the first cryptocurrency to offer a fully decentralized marketplace based on blockchain. What is lesser known is that this is only a part of what Syscoin offers.
With the introduction of Masternodes in February or March 2018 SYS will be transformed from just a ’marketplace coin’ to a completely ‘utilitarian coin’. The Masternode infrastructure allows the addition of decentralized databases and file storage, increased transaction speed to surpass POS/Visa/Mastercard capabilities, true Turing complete smart contract capabilities for unlimited business logic, sidechains, application layers and an identity layer. This will all be accessible through an API, rather than a new language, enabling nearly any developer to create any blockchain application they can conceive. This will usher in the next generation of blockchain applications - made for new or existing businesses - by conveniently offering everything available from the blockchain space today.

SYS Origin

The blockchain as conceptualized by Satoshi Nakamoto back in 2008 envisioned a peer-to-peer electronic cash network that would prevent double-spending. A year later, the blockchain became an integral part of bitcoin, serving as the latter's public ledger of transactions. Although Nakamoto's reference client mentioned a decentralized marketplace service, the subsequent implementation did not incorporate this due to a lack of resources.
Syscoin was initially described in a 2014 draft whitepaper that envisioned Decentralized Marketplace Creation, Decentralized Smart Contracts and Documents, Decentralized Certificate Issuance and Transfer, and Decentralized Data Storage and Retrieval, as among the services that it would offer upon its release.
Syscoin aimed to bring Nakamoto's vision of a decentralized marketplace back into the blockchain, among the other commercial-grade services it aims to deliver to clients. Other services that Syscoin plans to provide include secure data storage and transfer, and unique user aliases that link their owners to the services controlled by the alias.
The early Syscoin wallet was superseded by the release of Blockmarket Desktop 1.0 on September 12, 2017, marking the culmination of Syscoin's vision of a fully decentralized marketplace with a desktop GUI based on the blockchain.
The planned release of Blockmarket Web, a fully web-based version, and Blockmarket Professional in 2018 takes that vision one step further, as more advanced seller stores become a reality.

The Team

The Team that NEVER quits! Before the launch of Syscoin (Q3 2014), there was a presale ICO by Moolah (as a partner), which turned out to be detrimental for Syscoin. The project raised around 1,000BTC for development but the Syscoin Team only managed to access 250BTC which were used for price support. Moolah (Ryan Kennedy) absconded with the bulk of the ICO funds and the Syscoin team were left with ~30million Syscoin at a price around 400 satoshi. Even after this tragic event, the devs didn’t quit and continued to work on the project without stopping. The case against Moolah is still on-going. See the article from CoinDesk here: http://www.coindesk.com/uk-court-syscoin-injunction-moolah-750-btc/.
What is this detail telling us about the dev team? While some crypto projects are just scams and bring little to no innovation, they’ve proven that they are in it for the long term - ably demonstrated by the fact that they continued to work despite their funds being stolen. And now that hard work is beginning to pay off with the entire team going full-time for the first time in January 2018 and new developers being hired following VC funding for BF.

Team Page: https://syscoin.org/team/

Blockchain Foundry Products

https://www.blockchainfoundry.co/products

What is Blockmarket Desktop?

Building on the World's First Decentralized Marketplace, Blockmarket is the newest generation of Syscoin's Desktop wallet with a complete, state-of-the-art marketplace built-in where you can securely and reliably buy and sell any items you wish. Entire stores can be created directly through the marketplace where you can sell your own products or re-sell others’ products for commission. Use of blockchain technology eliminates middlemen, credit card fees, maintenance fees, downtime and political interference. Persons are literally able to buy or sell anything to anyone, anytime, anywhere on Earth! Blockmarket Desktop was launched on September 12, 2017.

Key Blockmarket Features

• Price Pegging to currencies such as USD, EUR, GBP, CAD, CNY and BTC
• Bitcoin and Zcash as payment options
• Arbitrated Escrow
• Encrypted Messaging
• KYC/AML Compliance
• Images
• Unlimited Inventory Items

Name Aliases

Wallet addresses for cryptocurrencies generally consist of a unique string of between 27-34 alphanumeric characters. Such an address isn’t easy to memorize. Although the addresses can be added to an address book within the wallet, Syscoin has taken the user's convenience one step further, allowing you to create a unique Alias for your wallet address, such as a name, title, or characters specific to a username. These can be used to send SYS from home, to a mobile wallet, to work, to friends, to common suppliers or to repeat customers easily, without requiring any memorizing, writing it down, copy & pasting or emailing yourself the address.

Digital Certificates

Using the cryptography of the blockchain persons can issue, authorize, and exchange digital certificates of any kind. With Syscoin anyone can issue provably-unique certificates with text or ASCII content to one or multiple parties on the Syscoin blockchain. These certificates can be authenticated by anyone via Syscoin’s cryptographic proof of work. This allows for the creation and free exchange of any kind of digital asset such as ownership certificates, warranties, receipts, tickets, certifications, diplomas, software licenses and more.

Integrated Exchanges

Integrated Crypto exchanges - Flypme and Changelly will facilitate exchanging 30+ cryptos for SYS, directly within the Blockmarket wallet.

Security Audit Verified

Blockmarket was successfully and independently security audited by Digital Boundary Group and was deemed low risk. Audit Results: [https://medium.com/@BlockchainFoundry/blockmarket-security-audit-results-and-next-steps-f69f94f149bf]

Blockmarket Web – (The Key to Mass Adoption)

BM web will bring SYS’s existing decentralized marketplace and all its features into a web-based version, enabling ease of use with a simple email and password login (grandma friendly) without any need for downloading a wallet or waiting for sync. Blockmarket web will be launched in February 2018.

Key Syscoin Developments

Masternodes

Ability for world-class transactions-per-second performance to scale-out with added nodes (theoretically 100k TPS per 1000 Masternodes, 300k TPS/3k masternodes, etc). In later releases, masternodes will also process smart contracts and facilitate sharded+encrypted offchain file-storage (with onchain anchors), among other touted functionality. They should also result in steadying the price movements - less volatility as holding will be incentivized

Smart Contracts

Scalable Ethereum Virtual Machine: Allows Turing complete smart contracts to be executed following the ethereum protocol at a much faster speed and at a fraction of the ethereum gas price.

Assets & Token Issuance

With its token issuance service, Syscoin allows anyone to create a custom asset token which can then be sent directly to anyone else on the network. This facilitates a variety of use cases including ICO token issuance, supply chain management, reward points, and loyalty programs.

Anonymous Transactions

Anonymous transactions: via mixing/shuffling at user-specified denomination. Afterwards, additional tech will be added in the near future which will further compound the degree of anonymity provided -Add ValueShuffle running on top of the masternode layer and you have the world's most advanced privacy tech in any coin. This brings true money fungibility to Syscoin and the missing link for true economic sovereignty. https://twitter.com/realSidhuJag/status/948588279540035584

Instant Send

Transactions can be sent and received instantly. This represents a similar sending capability as Dash, but is a step beyond- A type of backend node locking will allow an instantly received sum to be sent immediately, without delay, and without network risk of double-spend.

Why Invest in Syscoin?

https://medium.com/@StevenVoros88/the-most-undervalued-project-in-the-crypto-world-not-for-long-96814ac66b08 https://medium.com/@danieljasonwestby/syscoin-the-hidden-gem-of-2018-96f973b81b9 https://twitter.com/Asbsvc/status/939959284246380545 https://twitter.com/CryptoBulld0g/status/935915911776784384 https://medium.com/@BlockchainFoundry/syscoin-to-disrupt-ebay-and-real-estate-industries-96aa55ef709a https://medium.com/@thecryptojournal.com/top-crypto-investment-for-2017-b99656491c6f https://www.youtube.com/watch?v=VNDprLJhGys

Merchants

https://medium.com/@BlockchainFoundry/merchant-pilot-program-update-7479fe451639

Partnerships

(Microsoft Azure)[https://azure.microsoft.com/en-us/blog/syscoin-joins-azure/]

Decentralized Identity Foundation

https://medium.com/@BlockchainFoundry/consensus-decentralized-identity-foundation-blockmarket-beta-3-beyond-6f830419ea55

White Paper

http://syscoin.org/whitepaper.pdf
Note: It is anticipated that the whitepaper will be updated by the team in the near future due to recent developments

Roadmap

http://syscoin.org/images/roadmap_2018__1024.png

Blockchain Application Development Architecture

https://cdn-images-1.medium.com/max/1200/1*bUO6_nRI7q805edG59e0DQ.png

Feature List 2017 & 2018

https://pbs.twimg.com/media/DUJwbI_X4AI3QL_.jpg

Where to Buy

• Bittrex • Poloniex • Upbit • Tux Exchange • Livecoin • Yobit • AEX • Bittylicious • Changelly • Flyp.me

Wallets

• Block Market Wallet 1.2 – Windows and Mac. Download from https://syscoin.org/
• QT Wallet for Developers: Download from https://github.com/syscoin/syscoin2/releases/tag/2.1.6
• Coinomi – Syscoin MultiCoin Wallet (only supports send/receive)
• HolyTransaction – Syscoin Multicoin Web Wallet (desktop & android)

Other Sources

https://syscoin.org/ https://twitter.com/syscoin https://www.blockchainfoundry.co/ https://en.wikipedia.org/wiki/Syscoin
Disclaimer This post was created particularly to aid those who are new to Syscoin. Please note that the content provided within this post is for information purposes only and is not to be construed as investment advice.
submitted by one22manytimes to CryptoCurrency [link] [comments]

[ELI5] How to send coins using Coinb.in

How to send coins from ANY wallet using https://coinb.in/#settings

Why?

Because cold wallets, such as those stored offline in a text file as I keep recommending in my standard advice below:
All you need is a text file to put your wallets in, like this example from https://walletgenerator.net/?currency=Dogecoin
1,"D7WBUpdgLRtG6WyPsqjhaKiJR65X8ZGnkZ","6KieLMW1poAzNVnmLuQZqA262gxEQ51eLGdDK8e2GL2B4LHCKKb" 2,"DM8LT16d49zHr8ByXbUwZb9UBXDGMaZRdc","6Ktgxdv6vN9v2bDHwcJBBb3oMRAgXJumESzBnxaXUSGFZoq6pWQ" 3,"D5UCa51AfxjtVHQ46oYXe2YfkctTeLXPhx","6L2WSPWadRYCwt2L1CxH6zC7PoTYY3KyjxdiUoCqi5eyq6hQKvj"
Use https://coinb.in/#settings to move coins. Download both sites and run them offline. Use https://bitinfocharts.com/dogecoin/ to check balances and transactions. See http://www.mocacinno.com/blog/create-sign-broadcast-transactions-using-coinb/ for coinb.in tutorial. And read the ELI5s (and my history) for more info.
Are without doubt THE SAFEST way to store your coins. Plus, they consume no resources. No bandwidth, no network stress for every node we have, no storage of 20Gb+ blockchains, no weeks of waiting for things to sync, no tearing your hair out and posting desperate pleas for help, and most importantly, no coins irretrievably lost because you or your client screwed up.

What?

Wallets, ALL WALLETS are nothing but numbers. Very large numbers, but fundamentally no different from “7”, “42”, “911” or a phone number. They cannot be created nor destroyed, and you either know them or you don’t. Anyone who knows a key can use it to spend any coins it controls. Anyone who doesn’t know it, can’t. Don’t be the guy who doesn’t know his own keys. Keep them safe. Make copies. Keep those safe. Don’t let your friends, kid brother or random burglar find them, but don’t lose them either.
The only other thing you need for a fully functional wallet is a way to spend coins. Coinb.in is such a way. There are others, such as DogeCoinMultiSig.org which tomcarbon built.
Oh, and you can and should download it and run it locally.

Where?

The default entry point for coinb.in is https://coinb.in/#settings because this settings page is very well hidden. Its in the tiny gear wheel on the Broadcast page.
Looking across the top of the page, you can see
  • + New
  • Verify
  • Sign
  • Broadcast
  • Wallet
  • About
We’re only going to use three of these. New, Sign, Broadcast.
Now, keep in mind that coinb.in is an old Bitcoin tool which tomcarbon added Dogecoin to. Sometimes it thinks its dealing with Bitcoin still, so if you see anything odd, go and make sure you’ve selected Dogecoin in the Settings page.

When?

This tool should be the only place you spend coins. Sure, some clients may look more convenient, but they all suffer from a very big coin-losing flaw. Whenever you split a UTXO, they create a new wallet to send the change to. And they DON’T TELL YOU! This means unless you back up after every transaction, you run a high risk of finding all your coins have ‘disappeared’ from your wallet, and you don’t recognise where they went.
So if you use a client for the convenience as well as a text list of your wallets, you won’t know to add a new wallet to your masterfile. Its best to ditch the clients entirely.

How?

Now we come to the nitty-gritty. Lets use those three wallets above and assume that #1 is the source, #2 the destination and #3 the change wallet. Note that these won’t actually work, as none of them have ever been used, but they will do as examples.
New Transaction
Located at the bottom of the New menu, this will give you a page to enter your wallets and amounts.
In the top field, you enter your source address or Key. If you use the key, it will calculate the address when you click the Load button, which should match what you expected. Note that Load only brings in the first 100 UTXOs. This is so that you can retrieve coins from high-volume wallets which would kill any client. Coinb.in is in fact the ONLY WAY to do this, as even QT falls over around 600 UTXOs.
You will see the total balance that was loaded in the Transaction Fee field. And also in the Inputs tab, where you can go to adjust which UTXOs to spend.
Now you need to add the wallet(s) and amounts to send to them. Lets suppose the source contained a single UTXO for 1,000 Doge. You want to send 500 of them. So you would enter the #2 address in the Address field, and 500 in the Amount field. The Fee now changes to 500, which is not what you want.
So you click the + button to bring up a new line, enter the change address and the other 500, making the fee zero.
And you’re done. Check that the Fee is indeed zero. Check that the amounts shown in the Outputs and Inputs tabs match exactly.

THIS IS CRITICAL!

There is a bug which will send all the coins to the miners if the Outputs exceed the Inputs. I would have expected the Fee to show as negative in such a situation, but it doesn’t. BE WARNED!
Once everything looks right, hit the Submit button.
This will give you a block of hex code. Copy it.
Sign
Go to the Sign tab and paste it. Add your private key for the source wallet and click Submit. Note this can be done offline for safety.
This will give you another block of hex, the SIGNED transaction.
Broadcast
Copy this and paste it in the Broadcast tab and click Submit.
That’s it. Your coins are on their way. Make a cuppa and settle in while they arrive in a minute or three.
Note: All fields retain their values unless you refresh the page! This can be a boon when doing multiple transactions, such as when emptying a huge wallet. But it can also be a trap for the unsuspecting. Refresh or close the window when you’re done.

Who?

Who should use this?
Absolutely EVERYONE!
Even if you’re wedded to your client in some satanic blood-contract, you should still know how this works, because sooner or later you’re going to have a problem you can’t fix without it.
Definitely download the site and store it on every device you have. On every USB backup of your wallets. On your phone (well, except iOS which doesn’t do local HTML), etc, etc, etc.
Oh, and if you’re a programmer SmartyShibe, do consider improving the code over on GitHub.
EDIT: https://github.com/OutCast3k/coinbin added courtesy of AtomHearth
submitted by Fulvio55 to dogecoin [link] [comments]

Homelab collective ressources post!

Hey guys!
I'm fairly new to this sub and to having a home lab in general and I found this community to be so kind and helping, I wanted to give back what I've learned. I'm seeing a lot of questions asked around on improvements and on what to do with x extra hardware so I thought it would be nice to have a thread to regroup that.
 
I'll put here some stuff I gathered and the most common questions I've seen, feel free to contribute and i'll update the post along.
 
Latest Additions
 
Homelab Dashboard
Posts about dashboards have been growing lately and here are some of the best that were kind enough to provide us with their sources.
User Screenshot Source
yours truly http://imgur.com/a/GhCNH https://github.com/Gabisonfire/dashboard-q
lastditchefrt http://i.imgur.com/5zQdao4.png https://github.com/d4rk22/Network-Status-Page
_SleepingBag_ http://i.imgur.com/Ql9ZM4W.png https://github.com/jsank/homelabdash
NiknakSi https://niknak.org/extras/sysinfo TBA
DainBramaged http://imgur.com/jYNlUEQ https://github.com/gordonturneBigBoard
michaelh4u https://i.imgur.com/XkZwMKj.png https://github.com/michaelh4u/homelabfrontpage
spigotx http://imgur.com/a/1zMht https://github.com/spigotx/HomeLab2
SirMaster https://nicko88.com/ https://github.com/dashbad/plex-server-status
yourofl10 http://imgur.com/a/AyROa TBA
TheBobWiley http://imgur.com/a/oU6d3 https://github.com/TheBobWiley/ManageThis-LandingPages
0110010001100010 http://i.imgur.com/iwtQcsL.jpg https://github.com/danodemano/monitoring-scripts
mescon & SyNiK4L https://i.imgur.com/gqdVM6p.jpg https://github.com/mescon/Muximux
ak_rex http://i.imgur.com/a/RJkrT https://github.com/ak-rex/homelab-dashboard
 
Or build yours from scratch: PRTG API, ELK, Grafana, freeboard, JumpSquares
 
Some other resources: Custom Monitoring Scripts by 0110010001100010
 
Credits to apt64 for his original post
= Pi specific =
 
= Download Automation =
 
= Virtualization =
 
= Monitoring =
 
= Media Center =
 
= Remote access =
 
= VOIP =
 
= Networking =
 
= File Servers/Storage/RAID =
 
= Cameras =
 
= Documentation =
 
= Dynamic DNS =
 
= Backup =
 
= Creating network diagrams =
 
= Guides =
 
= Misc =
 
That's all I could come up with on top of my head + some research, passing over to you guys so we can get a nice complete list!
 
Let's try and stick with free(or mostly) softwares, let me know if you guys feel otherwise.
submitted by Gabisonfire to homelab [link] [comments]

How to install multiple qt coin wallets 6. bitcoin-qt Bitcoin Wallet Recovery Bitcoin-QT wallet review How to Download and Verify the Armory Bitcoin Wallet

Bitcoin-Qt is the so – called" official " client of the network, which is developed and promoted by Bitcoin Foundation, a non-profit organization uniting core developers and responsible for the community's contacts with corporations and governments.Bitcoin Foundation branches are opened in several dozens of countries around the world. Because of this, you can restore the same wallet on multiple machines and all copies will forever remain in sync. There are plans to add this sort of functionality to the main bitcoin-qt wallet, but until that is done, alternate wallets are needed if you want to share between computers. Electrum is not the only wallet that provides all these ... With the bitcoin-qt client, I'd like to have multiple wallets use a single set of blockchain data files. Why? Downloading a fresh copy of the blockchain can take days, and each copy of the blockchain seems to be ~ 5GB large. This feels somewhat wasteful if coins are spread about multiple wallets. In Bitcoin-Qt, only the first wallet will be displayed and accessible for creating and signing transactions. GUI selectable multiple wallets will be supported in a future version. However, even in 0.15 other loaded wallets will remain synchronized to the node’s current tip in the background. QT wallet – Most of the crypto currency core wallets are developed using QT software framework. They are available for Windows, Linux and Mac. QT wallets are professional client and offers full function that’s available for a currency. Also they are heavy as it is known to download the complete blockchain to your local computer.

[index] [21894] [23868] [45403] [32675] [19342] [40799] [38114] [10340] [26453] [47237]

How to install multiple qt coin wallets

In this video from http://www.secureyourwallet.com we do a full review of the original Satoshi Bitcoin wallet. We do an install, look at the blockchain data,... This video was Created to answer some of your questions about grouping your bitcoin wallet transactions into separate buckets. These are known as sub-wallets... Beknopte introductie van de BitCoin QT Wallet. Wilt u meer weten over BitCoin en de ontwikkelingen? Check http://intobitcoin.com of via Twitter: http://twitt... bitcoin paper wallet, bitcoin preev, bitcoin program, p vs np bitcoin, bitcoin miner .p bitcoin p bitcoin price bitcoin p=np forum.bitcoin. pl bitcoin qt bitcoin qr code bitcoin qt synchronizing ... This short tutorial explains what a Bitcoin wallet backup is and how to create it on 3 different wallets: Blockchain.info, Bitcoin-QT and MultiBit. For more information and tutorials about Bitocin ...

#